General Information

CASE STUDY: Composite Aircraft mold would not hold a vacuum.

Original Leaking Mold Surface CHALLENGE: 50’ x 4’ Aircraft Spar Tool would not hold vacuum, and a small quantity of production parts from the Tool was still required. Attempts to repair and extend the life of the mold thru various options had failed. If unable to repair the mold, the replacement cost would [...]

By |2018-06-11T11:11:55-05:00June 11th, 2018|General Information|0 Comments

Dyna-Tek Finalizes Sale of Specific Intellectual Property to Techneglas

Dyna-Tek is pleased to announce that it finalized the sale of specific intellectual property to Techneglas, LLC of Perrysburg, Ohio. Techneglas, a wholly-owned American subsidiary of Nippon Electric Glass, and Dyna-Tek have collaborated with each other for several years to develop an ultra-high temperature resin for use in composite materials. Dyna-Tek and Techneglas will continue [...]

By |2018-04-04T14:51:50-05:00February 14th, 2018|General Information|0 Comments

ECS Uses Dyna-Tek’s 2-Coat Mold Release System for ZL Plastics

Extreme Coating Solutions used our 2-Coat Mold Release System to solve a problem for ZL Plastics. They needed to find an alternative to PTFE-based coating for High-Density plastics Tooling Dies. Please read the case study on the ECS website located here.

By |2017-05-10T12:18:06-05:00May 10th, 2017|General Information|0 Comments

Dyna-Tek’s DT-6060 awarded patent by U.S. Patent and Trademark Office

Being awarded the patent for the 6060 coating puts an exclamation point on the potential for this product going forward. Since developing and filing for the patent 4 years ago, we've found this product to have a versatile range of applications besides its designed use as a mold release coating. In short some of the [...]

By |2017-02-13T10:31:01-06:00February 13th, 2017|General Information|0 Comments

New Mold Release Game Changer for the Tire Manufacturing Industry

Dyna-Tek is pleased to introduce a new, game-changing non-stick, mold-release coatings technologies. This comprehensive product line of new, patented technologies has been market tested over the past 3-4 years with success in a range of applications. A great example of this technology in use is enhancing the release properties of tire molds. For a deep [...]

By |2017-10-11T11:20:40-05:00January 11th, 2017|General Information|0 Comments
Go to Top