General Information

Dyna-Tek at 2019 Additive Manufacturing Conference in Austin, TX.

As part of our preparations for our 2020 launch of two new coating products for use in the additive manufacturing (AI) market, we attended the Additive Manufacturing Conference in Austin, TX earlier this year.

By |2019-11-13T12:06:15-06:00November 27th, 2019|General Information|0 Comments

Dyna-Tek Receives Boeing’s BAC 5578 Certification

Dyna-Tek is pleased to announce its qualifications to the Boeing Company’s BAC 5578 Process Specification. With this approval, Dyna-Tek is authorized by Boeing to supply our mold sealer and mold release semi-permanent coatings to other approved processors on Boeing’s D1-4426 document who manufacture advanced composite primary structures for Boeing.

By |2019-11-13T11:48:12-06:00November 13th, 2019|General Information|0 Comments

Dyna-Tek is Moving its Production Processes to Live in an Argon Atmosphere

Although we have always minimized the introduction of air in our manufacturing process, it has been our expectation to eliminate this variable. As a result, we have been re-engineering our production processes to live in an atmosphere with no oxygen (or moisture) present.

By |2019-11-13T11:50:10-06:00May 31st, 2019|General Information|0 Comments

Dyna-Tek adds Fourier Transformation Infrared (FTIR) to our Quality Management System

Our newest tool for achieving identical coating products from batch to batch is the addition of two new, research-grade Thermo-Nicolet iS10 Fourier Transformation Infrared (FTIR) spectrometers. One of these units has been dedicated full-time to our Quality Assurance Dept; who has nicknamed it “Nicki”.

By |2019-11-13T11:51:28-06:00May 17th, 2019|General Information|0 Comments

Dyna-Tek’s DYNA-SLICKSHIELD™ coating technology chosen for Gold Tip’s New AIRSTRIKE™ arrow

Dyna-Tek is pleased to announce it has entered into an exclusive agreement with Gold Tip® to supply our new DYNA-SLICKSHIELD™ polymer coating technology for Gold Tip’s brand-new, top-end hunting arrow; the AIRSTRIKE™.

By |2019-11-13T11:52:02-06:00January 14th, 2019|General Information|0 Comments

Happy New Year from Dyna-Tek!

Can you believe that it's 2019? It seems like 2018 was more of a "season" than an actual 12-month period. We've been working hard to get ready for this year! In tandem with Extreme Coating Solutions, we've been implementing a NetSuite ERP Business Management System. This will ultimately give us even more control of our [...]

By |2019-01-14T12:01:10-06:00January 1st, 2019|General Information|0 Comments

CASE STUDY: Composite Aircraft mold would not hold a vacuum.

Original Leaking Mold Surface CHALLENGE: 50’ x 4’ Aircraft Spar Tool would not hold vacuum, and a small quantity of production parts from the Tool was still required. Attempts to repair and extend the life of the mold thru various options had failed. If unable to repair the mold, the replacement cost would [...]

By |2018-06-11T11:11:55-05:00June 11th, 2018|General Information|0 Comments

Dyna-Tek Finalizes Sale of Specific Intellectual Property to Techneglas

Dyna-Tek is pleased to announce that it finalized the sale of specific intellectual property to Techneglas, LLC of Perrysburg, Ohio. Techneglas, a wholly-owned American subsidiary of Nippon Electric Glass, and Dyna-Tek have collaborated with each other for several years to develop an ultra-high temperature resin for use in composite materials. Dyna-Tek and Techneglas will continue [...]

By |2018-04-04T14:51:50-05:00February 14th, 2018|General Information|0 Comments

ECS Uses Dyna-Tek’s 2-Coat Mold Release System for ZL Plastics

Extreme Coating Solutions used our 2-Coat Mold Release System to solve a problem for ZL Plastics. They needed to find an alternative to PTFE-based coating for High-Density plastics Tooling Dies. Please read the case study on the ECS website located here.

By |2017-05-10T12:18:06-05:00May 10th, 2017|General Information|0 Comments